Welcome to appliances-repair-toronto. This article will explain you how to replace the pump in a washing machine. Before replacing a part in any electrical appliance you must ensure that the appliances first unplug it from the mains.
To remove the pump from your washing machine you first need to remove the filter cover to empty out any water that’s collected in there.
You first need to remove the lid and the front panel of your few washing machine. To remove the lid undo these two screws here and then you can just lift it off. To remove the facia first take out the soap draw by depressing this button undo these two screws on the top and these two screws on the front. Then you can unclip it and lift it off.
Then you’ll have to remove the bottom panel by taking the filter cover of and undoing these screws it should then just come away.
To remove the front panel you needs first to remove the clamp band the hold’s the door seal in place and fold the seal into the drum.
The front panels held on with screws at the top and the bottom. Once these are removed you can lift it off and disconnect these wires to remove it completely. Undo these two screws that hold the pump in place. and then you can lift it out from the back like this.
Unclip the two wires that connects the pump to the washing machine you’ll see two metal clamps that secure the pump onto the hoses. you probably need pliers to open these up so you can slide them up the hose and away from the pump.
The pump should now come away from the hoses and you can attach the new pump on to them. Replace the clamps using the pliers and plug the wires onto the new pump.
Holding the pump in place replace the screws that attach it to the washing machine.
And you can then replace the filter cover and front panels For all the spare parts you need visit www.appliances-repair-toronto.co.uk